- Search
FAQ Search Results
Learn to understand the Eazypod Automatic Control Box (In Real Time)
Understanding the Eazypod Automatic Control Box (In Real Time)
Are evoUVs suitable for saltwater?
Yes, all The evoUV clarifiers are suitable for saltwater, the Aquarium UV Sterilizer is made specifically for marine aquariums and is available in 15 and 25watt versions with additional fittings for connection to typical aquarium circulation...
How do I set-up and install an evoUV?
You can follow the step by step instructions located in the manual below or you can watch our YouTube video here:
evoUV ManualWatch how to install an evoUV:
My pond water is not clear, is this due to the evoUV not working correctly?
Koi, goldfish and other pond inhabitants can cause murky water by stirring up the bottom of the pond. This murky water should not be confused with suspended algae. Always check all your pond filtration is working and is being maintained correctly prior...
My UV Bulb is not lit on my evouv, what should I do?
You need to investigate the power to your unit.
Has your RCD tripped? If yes, check your wiring and reset.
Examine the UV bulb for signs of failure, and replace if necessary.
Is the UV bulb fitted correctly? Unscrew the end caps and ensure correct...
My UV was working but my pond has gradually been turning green, why?
Quartz sleeve may have become dirty and requires cleaning. Also make sure you have the right model for your pond size. Ensure your pond filtration is removing fish waste and debris efficiently. Dirt in ponds will affect the efficiency of the evoUV. Check...
My evouv appears to be leaking from the end fittings?
This could possibly be caused by an incorrectly fitted, damaged or overtightened O-Ring on the quartz sleeve. Please check the quartz sleeve O-Ring, reposition it or if necessary replace it with a new one. Follow the steps on page 14 in the manual to...
How can I insulate my unit for the cold weather?
The key thing is to make sure the UV is never turned off. The unit could be wrapped in loft insulation and then a waterproof membrane if you live in a very cold area.
What size evoUV do I need for my pond?
For help choosing the correct UV that is suitable for your pond. Please see the table below.
Which side is the inlet and outlet on my evouv?
The inlet and outlet can be installed either left (Inlet) to right (Outlet) or right (Inlet) to left (Outlet).
What do I need to reduce a 110W evouv from 2" to 1.5"
If you intend to use flexible hose, you would need:
2 x 2-1.5’’ reducing bushes – EA Code: R81-063
2 x 1.5’’ pressure to waste sleeves – EA Code: M35-050
2 x 1.5’’ solvent hosetails – EA Code:HOSETAIL15If you intend to use pressure pipe, you would...
How do I change the T8 Sockets and Black End Caps?
Watch the step by step video below to learn how to change the T8 Sockets and Black End Caps on an evoUV.
The Same process would follow for both old and new versions of our evoUV's
How do I change the ballast on a pre-2021 evouv?
To change the ballast on a pre-2021 evouv watch the video below for the step-by-step process.
Can the Varipump be used with Nexus and EazyPod automatics?
Yes, the Varipump is ideal for using with either the Nexus or EazyPod automatic.
Does the Varipump come supplied with a plug?
No
What size fuse do I need for a Varipump?
As all the Varipumps use less than 700watts so 3 amp fuse is suitable.
How long is the power cable on a Varipump?
The cable from the mains to the control box is 2metres, the cable from the control box to the pump is 10metres, this makes the total length 12metres.
Can the Varipump control box be kept outside?
The control box is weather/rain proof and can be kept outside, it MUST NOT be submerged in water.
Can the Varipump be used as a dry pump?
Yes, the Varipump is suitable to use as a dry pump on a gravity fed system, the pump is not self-priming so a non-return valve needs to be used if the water level is below the pump.
How do I clean the Varipump?
To clean the Varipump, follow the steps below or watch our YouTube video here:
Step 1: Hold pump by the handle and remove the inlet strainer basket
Step 2: Using a Phillips screwdriver, undo the four screws at the base of the pump body
Step 3: ...
Did you find what you were looking for?
Tags