Our last shipping day for online orders will be Wednesday 18th December, 2024 by 12:30. Orders placed after that will be dispatched from Wednesday 8th January 2025.
- Search
FAQ Search Results
Should I switch my Ultra Violet Clarfier Off when using EA Blanketweed?
UV clarifiers do not need to be turned off when using Evolution Aqua Blanketweed
What is the diameter of K+ Media?
K+ media has a diameter of 10.2mm.
What is the total surface area of K+ Media?
K+ Media has a total surface area of 1350m² per m³.
What is the protected surface area of K+ Media?
K+ Media has a protected surface area of 1025m² per m³.
I have an EvoFeed Automatic that I purchased after 2021. How do I adjust the throwing distance using the buttons on the display screen?
On models manufactured after 2021, the evoFeed Automatic throwing distance can be adjusted using the buttons onthe display located on the front of the feeder. Use this instruction manual for advice: ...
I want to set a lower feeding sequence on the EvoFeed Automatic than the pre-sets, can I do this?
You cannot adjust the feeding sequence or throwing distances below the minimum settings. Adapting or modifying the feeder will void the warranty.
What is the purpose of the black inlet pipe on an Eazypod?
The pipe in the inlet performs 2 functions –
It allows the water to remain at the correct height for cleaning when the pump is switched off. Without this, the water would empty back into the pond, and there wouldn’t be enough water left in the...
How do I change the relay on an Automatic Filter?
<p>Watch the step by step video below to learn how to change the relay on an automatic filter.</p>
<p><iframe title="YouTube video player" src="https://www.youtube.com/embed/bTEkdTVnVnQ" width="560" height="315" frameborder="0...
<p><iframe title="YouTube video player" src="https://www.youtube.com/embed/bTEkdTVnVnQ" width="560" height="315" frameborder="0...
How do I set up an evoFeed Automatic?
How to set up an evoFeed Automatic
How long is the standpipe for the return in a Nexus+ that is pump-fed?
The return pipe is 40.5cm long in the 220 and 46cm long in the 320
The inlet valve does not turn on my Nexus during a cleaning cycle.
Check if the inlet valve is being obstructed.
Check if the yellow light is illuminated. If light is not illuminated after 3 minutes, initiate a manual clean to check operation.
Check the wiring is correctly installed. Seek advice from a suitably ...
How do I identify the spare part I need for my Nexus?
To ascertain what spare part you need for your Nexus please click the thumbnail below to open the PDF document and visualise the correct parts.
What volume of water is send to waste in my Eazypod during a cleaning cycle?
Approx 80L of water is send to waste during each cleaning cycle.
Please see the manual for more information.
Please see the manual for more information.
EazyPod Automatic does not close waste valve
You will find out that the circulation pump will not switch on and the green and amber light are both illuminated.
Remove the unions from the waste valve and check for any blockages.
Check the fuse inside the control box. This is located in the hinged...
What is the recommended flow rate for the K+Advanced Filter?
We specify optimum flow rates for the K+Advanced Filters: - 6,000 litres per hour for the 20" K+Advanced Filter - 12,000 litres per hour for the 24" K+Advanced Filter - 18,000 litres per hour for the 30" K+Advanced Filter - 30,000 litres per hour for...
What is the maximum flow rate of the K+Advanced Filters?
The maximum flow is dictated by the pond size, there is no maximum flow rate specified, however we advise optimum flow rates.
What kind of filter is works best with the Cetus Sieve?
The Cetus Sieve is suitable for use with both pressurised filters such as the K+Advanced Filter, and non-pressurised filters such as the...
Does the Cetus Sieve need to be installed above the water level?
If the Cetus Sieve is installed on a gravity fed system it will need to be level with the surface of the pond (please refer to the manual). If the Cetus Sieve is installed on a pump-fed system it will need to be above the surface of the pond, if not ...
Where do I install the evoUV?
Usually the UVC will be the first piece of equipment after the circulation pump. On a pump fed filtration system this means the UVC will be installed before the pond filter, and on a gravity fed filter after the circulation pump that returns the water...
Are UV rays harmful?
Yes
Did you find what you were looking for?
Tags