EazyPod supplied with Air Pump 70 Kit
A compact member of the Nexus family, the EazyPodAir is a mechanical and biological filter system for ponds up to 10,000 litres.
The EazyPodAir utilises static K1 Micro, which provides enhanced biological benefits, even when using the EazyPodAir solely as a mechanical waste filter.
How the EazyPodAir works
Water from the pond enters the EazyPodAir via the inlet and then flows around the circumference of the outer chamber of the EazyPodAir, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration.
As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place.
After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet.
The EazyPodAir is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter.
A 70 litre per minute air pump is recommended for use during the cycle cleaning.
*Only EazyPodAir and EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit.