EazyPod Complete

Online Store | Filtration |  EazyPod Complete

EazyPod Complete

EazyPod
 

A compact member of the Nexus family, the EazyPod Complete is a mechanical and biological filter system for garden ponds up to 10,000 litres. The EazyPod Complete utilises static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod Complete solely as a mechanical waste filter.

Unlike the EazyPod and EazyPodAir, the EazyPod Complete benefits from having an integrated 18 Watt UVC built in to the inlet section of the filter. This makes it a complete filter system in one, helping to eradicate green water, therefore delivering crystal clear and healthy water for your fish.

EazyPod Complete

 

Specifications

EazyPod Complete Specifications

 

Dimensions

EazyPod Complete Dimensions

   

 

Installation Manuals

Click on the links below to download the EazyPod Complete installation manual:

EazyPod Complete Manual

 

How the EazyPod Complete works

Water from the pond enters the EazyPod Complete via the inlet, cascading around the 18 Watt UV-C bulb, where any algae will be exposed to the UV-C radiation.

The water then flows around the circumference of the outer chamber of the EazyPod Complete, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration.

As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place.

After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet.

The EazyPod Complete is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter.

All EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit.

How the EazyPod Complete Works

 

Specifications

EazyPod Complete Diagram

 

Installation Equipment

1. Pond Pump. Please ensure that the pumpís maximum actual flow rate is no more than the specified limits.

2. Air Pump for cleaning the K1 Micro. The supplied EA Airpump 70 is recommended.

3. A length of garden hose or braided pipe (10 mm inner diameter) to connect your air pump to the air ring inside the EazyPod Complete.

4. Tip: When connecting to your air pump, cut an inch from the airline supplied on the EazyPod Complete. Insert this into the hose pipe that connects to the air pump. This will help maintain the hosepipeís rigidity when inserting it into the rubber connector and clip supplied with your air pump.

5. Pipe work from the unitís waste valves to the intended discharge point. This can be rigid pipe work or a simple flexible hose.

 

EazyPodComplete Installation

Installation - PUMP FED ONLY

EazyPod Complete can only be installed on PUMP FED set-ups.

 

Pump Fed Set-Ups

By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).

EazyPod Complete Pump Fed Install

 

 

Register Your EazyPod Complete Warranty

A new EazyPod Complete is covered with a 2 year warranty from date of purchase. To register this warranty please complete the online registration form or send us your warranty card which can be found in the instruction manual.

Click here to complete the online warranty registration form.

Products and spare parts

Find below a list of products and spare parts for the EazyPod Complete filtration system:

 


EazyPod CompleteEazyPod Complete

Ref: EAZYPODUV
Includes an AirPump 70 Kit


Price: £645.00 (Including VAT)


Quantity:  



EazyPod Complete - Granite GreenEazyPod Complete - Granite Green

Ref: EAZYPODUVGREEN


Price: £645.00 (Including VAT)


Quantity:  



EazyPod Kit BagEazyPod Kit Bag

Ref: EAZYPODKITBAG

Kit bag of parts for the EazyPod to enable easy connection to an Air Pump. (This kit bag is the same as is supplied with an EazyPodAir)

CONTAINS:
- QTY x 2: 80mm x 30mm AirStones
- QTY x 1 Chrome 4 Port Manifold
- QTY x 1 Rubber Elbow
- QTY x 1 12mm T-Piece
- QTY x 2 Clips
- QTY x 2 Silicone Tube
- 10cm of 12mm Airline
- 80cm of 12mm Airline


CLICK HERE for more info

Price: £11.95 (Including VAT)


Quantity:  



EazyPod UV Automatic AND EazyPod Complete - Replacement UV UnitEazyPod UV Automatic AND EazyPod Complete - Replacement UV Unit

Ref: CUV-118

Full replacement UV Unit - including UV Ballast, Quartz Sleeve and 18 Watt PLL Bulb for EazyPod UV Automatic and EazyPod Complete models.

PLEASE NOTE:This part is sold as a replacement spare part. It is not possible to retro fit this onto any Eazypod.

CONTAINS:
- QTY x 1 UV Ballast (18 Watt)
- QTY x 1 PL-L Bulb (18 Watt)
- QTY x 1 Quartz Sleeve (18 Watt)
- QTY x 1 Quartz Sleeve O-Ring


Price: £39.95 (Including VAT)


Quantity:  



EazyPod UV Automatic AND EazyPod Complete - Replacement Quartz SleeveEazyPod UV Automatic AND EazyPod Complete - Replacement Quartz Sleeve

Ref: CUV-118 QuartzSleeve

Quartz sleeve part only for EazyPod UV Automatic and EazyPod Complete models.

PLEASE NOTE:This part is sold as a replacement spare part. It is not possible to retro fit this onto any Eazypod.

CONTAINS:
- QTY x 1 Quartz Sleeve (18 Watt)
- QTY x 1 Quartz Sleeve O Ring


Price: £19.95 (Including VAT)


Quantity:  



EazyPod UV Automatic AND EazyPod Complete - Replacement BallastEazyPod UV Automatic AND EazyPod Complete - Replacement Ballast

Ref: CUV-118 Ballast

18 Watt PLL UV Ballast part only for EazyPod UV Automatic AND EazyPod Complete models.

PLEASE NOTE:This part is sold as a replacement spare part. It is not possible to retro fit this onto any Eazypod.

CONTAINS:
- QTY x 1 UV Ballast (18 Watt)


Price: £19.95 (Including VAT)


Quantity:  


EazyPod Connectors

EazyPod Connectors


4" to 3" Adaptor
Ref: FE111-085
Price: £7.85 (Including VAT)

Quantity:  


Used for Pump Fed Outlet on the EazyPod Complete, EazyPod Air and EazyPod.
Used for Gravity Fed Inlet on the EazyPod and EazyPod Air only.

Online Store | Filtration |  EazyPod Complete